Make your order complete
Maak je order compleet
Display, Set & More
This set includes the deluxe Lash Lift Display and everything else you see in the photo. Total value: €215.
- Lash Lift Adhesive, 10 ml
- Step 1 Lifting Cream, 5 ml
- Step 2 Fixing Cream, 5 ml
- Step 3 Nourishing Oil, 5 ml
- 3x Lifting Tool
- 5x Lash Lift Shields
- 50x Applicator
- 50x Spoolie
- Treatment Enhancer
- Comprehensive manual
- Lash Elevation Brush
Processing times
Steps 1 & 2
Fine lashes 5 min.
Normal lashes 6-7 min.
Stiff lashes 8 min.
Step 3 let sit for 1 minute.
The Right Aftercare
Give your client proper aftercare advice for optimal results after the lash elevator treatment.
- For the first 24 hours after treatment, lashes should be treated with care: avoid steam baths and saunas during this time, avoid excess water on lashes and do not use mascara.
- After 24 hours, the client can treat her eyelashes as she normally would.
- If irritation occurs, the client should return to the salon or seek medical advice.
- Advise against using waterproof mascara while the client is enjoying the lash elevator.
- The treatment can be repeated every 6-8 weeks, depending on the natural lash cycle.
Step By Step The Most Beautiful Lash Lift
1. Cleanse the eye area with an oil-free product to remove dirt and makeup residue.
2. For even better results, put some drops of Mrs.Highbrow Treatment Enhancer on a cotton pad and go over the lashes with it.
3. Have the client open the eyes and look at you. Apply eyepads directly on top of the lower lashes and ask the client to close the eyes once they are comfortably placed.
4. Apply Adhesive to the back of the silicone shield.* Place the shield as close to the roots on the eyelid as possible. Carefully lift the brow when placing the elevator shields to ensure proper adhesion.
5. Apply adhesive in small portions to the top of the lash shield. Using the lash elevator tool or Lash Elevation Brush, gently pull the lashes firmly onto the shield. Do this lash by lash.
6. From the front, check that it is done as symmetrically as possible on both eyes.
7. Apply Step 1 Lifting Cream with a clean microbrush. Apply the cream from the root to 2/3 of the lash.
8. Allow to soak in (see Soaking Time). Once the soaking time is up, remove the Lifting Cream with a cotton swab in upward motions. Wipe off excess on a tissue.
9. Apply Step 2 Setting Cream with a clean microbrush from the root to 2/3 of the lash.
10. Allow to soak in (see soaking time). After the time has elapsed, remove with a cotton swab in upward strokes and wipe the excess on a tissue.
11. Use a cotton swab in small circular motions to detach the lashes from the elevator shields. Remove the lash elevator shields.
12. Paint the lashes if necessary. Leave on for up to 6 minutes. Because the lashes have just been treated, the dye works faster.
13. Gently brush the eyelashes with a disposable spoolie.
14. If desired, apply Mrs.Highbrow Keratin Complex, a booster for healthy lashes! Apply generously to lashes, including the tips, with a microbrush or applicator. Leave on for 5 minutes.
15. Apply Step 3 Conditioning Oil over the full length of lashes. Let sit for 60 seconds.
16. Wipe from root to tip with two cotton swabs to remove excess product, including glue left on lashes.
17. Remove the eyepads.
* When using the Mrs.Highbrow Lash Lift Shields Soft & Easy, no glue is needed to attach the shields to the eyelids.